Comments for Laser-CutZ https://www.laser-cutz.com NYC Fastest Laser Cutting & Engraving Services Sun, 27 Jun 2021 06:07:51 +0000 hourly 1 https://wordpress.org/?v=6.2.4 Comment on Thor hammer metal laser engraving by New York Laser Guru https://www.laser-cutz.com/thor-hammer-metal-laser-engraving/#comment-1609 Sun, 27 Jun 2021 06:07:51 +0000 http://www.laser-cutz.com/?p=1718#comment-1609 In reply to jason.

can be engraved same day when we get item

]]>
Comment on Laser Service Prices by New York Laser Guru https://www.laser-cutz.com/prices/#comment-1607 Sun, 27 Jun 2021 05:55:54 +0000 http://www.laser-cutz.com/?page_id=277#comment-1607 In reply to Donna.

sure send us email to setup appointment

]]>
Comment on Deep Metal Laser Cut Soap Stamp by New York Laser Guru https://www.laser-cutz.com/deep-metal-laser-cut-soap-stamp/#comment-1606 Sun, 27 Jun 2021 05:55:03 +0000 http://www.laser-cutz.com/?p=1808#comment-1606 In reply to Daniel Fister.

sure we produce exactly as in your file, you can send artwork via contact page

]]>
Comment on Leather presentation folder case laser engraving and gold color infill by New York Laser Guru https://www.laser-cutz.com/leather-presentation-folder-case-laser-engraving-and-gold-color-infill/#comment-1605 Sun, 27 Jun 2021 05:54:22 +0000 http://www.laser-cutz.com/?p=1339#comment-1605 In reply to A.

if article not engraved yet you can engrave it with masking tape or protective layer then brush in gold ink to it. if item already engraved brush in gold ink let dry and start wiping and polish out external surface so inner cavity stays filled with gold ink. all manual labor

]]>
Comment on Laser Service Prices by New York Laser Guru https://www.laser-cutz.com/prices/#comment-1603 Sun, 27 Jun 2021 05:51:31 +0000 http://www.laser-cutz.com/?page_id=277#comment-1603 In reply to jo-ana moreno.

sure we can engrave and custom make cutting boards

]]>
Comment on Wood Grill Laser Cutting Decorative Elements by New York Laser Guru https://www.laser-cutz.com/wood-grill-laser-cutting-decorative-elements/#comment-1602 Sun, 27 Jun 2021 05:51:03 +0000 http://www.laser-cutz.com/?p=1553#comment-1602 In reply to Yesenia Godoy.

please send your panel designs to us via contact page we will review and give you price

]]>
Comment on Washington DC Wedding Invitation Monuments Card Paper Laser Cutting by New York Laser Guru https://www.laser-cutz.com/washington-dc-wedding-invitation-monuments-card-paper-laser-cutting/#comment-1601 Sun, 27 Jun 2021 05:50:17 +0000 http://www.laser-cutz.com/?p=2039#comment-1601 In reply to Charlotte Palmer Lekakos.

yes sure we can do adhesive photos

]]>
Comment on CO2 laser cutting machine repair service in Long Island NY by New York Laser Guru https://www.laser-cutz.com/co2-laser-cutting-machine-repair-service-in-long-island-ny/#comment-1470 Thu, 03 Jun 2021 20:16:31 +0000 http://www.laser-cutz.com/?p=1891#comment-1470 In reply to Mike Garofalo.

Sure we can do mirror aliment and any laser machine service and installations

]]>
Comment on Ceramic Mug – Deep cut laser engraving by New York Laser Guru https://www.laser-cutz.com/ceramic-mug-deep-cut-laser-engraving/#comment-1469 Thu, 03 Jun 2021 20:14:26 +0000 http://www.laser-cutz.com/?p=1039#comment-1469 In reply to Nick.

what you see on our post was not done with CO2, we used 80W MOPA instead. It penetrates calcium or concrete fairly easy. in fact higher powers are used for concrete laser drilling.
On 40W CO2 at best you will see little channel and many many passes will be needed. If original ceramics is synthetic then you will see more melting then chipping which will not allow deep engraving at all. So i recommend trying job on MOPA or at least Qswith fiber with max possible power and smallest lens… like at least 70mm Theta

]]>
Comment on Ceramic Mug – Deep cut laser engraving by Nick https://www.laser-cutz.com/ceramic-mug-deep-cut-laser-engraving/#comment-1468 Thu, 03 Jun 2021 10:39:39 +0000 http://www.laser-cutz.com/?p=1039#comment-1468 I am having a bad migraine with ceramic engraving/marking.
Do you have ceramic marking ink or something similar?

When I tried to use my 40W co2 to engrave deep into a ceramic tile, it just doesnt work, and wont go deep enough, so engraving, and then inking it later wont work for my use.

]]>